To obtain a thermal diffusivity predicting equation for meat products, minced pork meat was mixed with some additives such as lard, isolated soybean protein, 1.5% of table salt and 2% of polyphosphate to control the composition and texture of the products and then stuffed in a model can. Heat penetration curves were measured in the temperature range of 80.76~121.03$^{circ}C$ by using a thermocouple fixed at the cold point of the model can and the thermal diffusivities were calculated from the plotted heat penetration curves. At constant heating temperature, the thermal diffusivities of pork meat with water content of 49.01~77.55% increased linearly with increasing water content. The thermal diffusivities of the products with constant water content also increased linearly with increasing heating temperature and the values could be predicted by following equation: $alpha$p=(2.1394+0.5X$_{w}$).$alpha$$_{w}$+0.0035.10$^{-6}$ .X$_{w}$-0.2785.10$^{-6}$ ,(m$^2$.s$^{-1}$ ). The maximal difference of the values predicted with this equation on the basis of the practical measured values were less than 1.7%. 1.7%.