The characteristics of waveguide, electrode and packaging fabricated for acousto-optic tunable filters(AOTF) used for optical communications were analyzed. A $Ti:LiNbO_3$in-diffusing method was employed for the formation of the optical waveguide with a dimension of width $8{mu}m$, length $30000-50000{mu}m$ and varying the thickness. The diffusion was carried at $1050^{circ}C$ for 8 hours to pattern the optical waveguide. The resulted waveguide exhibited a single mode at 1550nm optical wavelength. The width of IDT, with 10 SAM periods, was $5000{mu}m$ . Impedances of the electrodes deposited with Au were analyzed using a network analyzer; $48.1Omega$ at the center frequency of 193MHz for electrode thickness of $1500{AA}$ and $50.7Omega$ at the center frequency of 192MHz for $1600AA$. And the characteristics of packaged AOTF was analyzed. When the electrical frequency 177.1MHz was applied to the device, the mode conversion efficiency was measured as 63% at the optical wavelength 1515nm.