In order to improve the final product quality, tobacco industry has gradually decreased the size and number of steams in the cigarette. Especially, steams bigger than $3{ imes}3$ mm($length{ imes}thickness$) and $2{ imes}10$ mm($width{ imes}length$) are not acceptable in the process as objectionable stems. A total number of 12 samples where the $length{ imes}tickness$ samples were prepared by decreasing the present sample ($3{ imes}3$ mm) with 1 mm up to $1{ imes}1$ mm, and the $width{ imes}length$ samples were prepared by decreasing the present sample ($2{ imes}10$ mm) with 2 mm up to $2{ imes}6$ mm for the stems in leaf and stems in expanded cut-tobacco were prepared to apply a fire ball drop test using stems. In addition, cigarettes were produced for these stems in order to analyze the forced fire ball drop including the burning, encapsulation and unencapsulation pressure drop and a single or unspecified direction combustion. Based on the results of the test, it was evident that the fire ball drop in the stems in expanded cut-tobacco presented a lower level than that of the stems in leaf. Also, the stems in expanded cut-tobacco presented a larger swelling and higher burning for a single direction than that of the stem in leaf. In addition, it was considered that the management criteria for objectionable stems should be changed as $3{ imes}3$ mm and $2{ imes}8$ mm for the $length{ imes}thickness$ and $width{ imes}length$ sample, respectively, in both steams in leaf and expanded cut-tobacco.