기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
세탁소 배출 휘발성유기화합물의 흡착 제거 기술
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • 세탁소 배출 휘발성유기화합물의 흡착 제거 기술
  • Adsorption of VOCs from Dry Cleaning
저자명
이승재,문승현,Lee. Seung-Jae,Moon. Seung-Hyun
간행물명
대한환경공학회지
권/호정보
2009년|31권 11호|pp.1025-1032 (8 pages)
발행정보
대한환경공학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

본 연구에서는 세탁소에서 배출되는 휘발성유기화합물을 흡착처리하는 공정의 개발 가능성을 검토하였다. 휘발성 유기화합물을 흡착하는 재료로는 핏치계 활성탄소섬유를 선택하였고, 흡착제의 재생방법으로는 전기변동법을 사용하였다. 용제는 트리클로로에틸렌과 톨루엔을 대상으로 하였으며 활성탄소섬유와 용제의 종류에 따른 파과곡선과 흡착량을 비교 검토하였다. 흡착량을 증대시키기 위하여 다양한 방법으로 활성탄소섬유를 전처리하였다. 또한 흡착이 완료된 활성탄소섬유의 재생에 필요한 온도와 허용전압을 측정하였다. 그 결과 트리클로로에틸렌의 흡착에는 미세 기공이 잘 발달된 활성탄소섬유가 우수한 성능을 나타낸 반면 톨루엔의 경우에는 비표면적이 큰 흡착제가 우수한 성능을 보였다. 활성탄소섬유는 흡착제 무게의 41~54%에 해당하는 트리클로로에틸렌을 흡착하였으며 유입되는 휘발성유기화합물의 농도가 높아지면 완전흡착시간은 급격히 짧아지고 흡착량은 서서히 감소하여 낮은 농도의 휘발성유기화합물을 처리하는 것이 보다 유리한 것으로 나타났다. 활성탄소섬유 표면의 산소작용기를 조절한 결과, 진공열처리를 한 활성탄소섬유의 톨루엔 흡착성능이 가장 우수한 것으로 나타나, 톨루엔의 흡착은 빈자리 탄소(vacant carbon site)가 흡착점이라고 판단된다. 흡착된 용제는 $150^{circ}C$에서 대부분 탈착되었다.

기타언어초록

This study investigated a possibility to develop an adsorption process for volatile organic compounds (VOCs) of the solvent emitted during dry cleaning. Pitch activated carbon fiber (ACF) was chosen as an adsorbent of VOCs, and an electric swing adsorption process was utilized for the reproduction of the adsorbent after the completion of VOCs adsorption. Effects of ACF types and several solvents such as trichloroethylene (TCE) and toluene were examined on breakthrough curves and amounts of adsorbed VOCs. ACF was pretreated under various conditions in order to enhance the amounts of the adsorbed VOCs. Temperatures and voltages were measured for the reproduction of the ACF after full adsorption. ACF having micropores exhibited high adsorption of TCE, and high surface area of ACF could increase the adsorption property of toluene. In general, ACF could adsorb 41~54% TCE of the adsorbent weight. The increase of inlet VOCs concentration significantly decreased the breakthrough time and slightly lowered the amounts of adsorbed VOCs. Thus, ACF could effectively adsorb VOCs in low concentration in the feed stream. ACF pretreated by heat under vacuum showed excellent toluene adsorption with controlling oxygen functional groups on the ACF surface, which revealed that vacant carbon site could be the adsorption point of toluene. Most adsorbed toluene was desorbed at $150^{circ}C$.