Anti-shock performance is one of the most important design specifications of TFT-LCD modules. Since they are adopted fur major display units of many mobile applications such as lap-top PCs, cellular phones, and palm pilots, they are able to accommodate and endure high level transient mechanical energy inputs. For the reasons, not only the LCD unit manufacturers but their customers like PC makers perform a series of strict impact/drop test on the units. Currently, designers are mostly relying on their own trial-error based experience for the anti-shock design. Thus those designs depending on only experience may result in disqualification from the drop/impact test during final product evaluation. Those shock failures of any new designs are prohibitive for both LCD and PC manufacturers. In order to avoid this problem, many designers are focusing on the development of computer-aided design tools that is directly connected to shock simulation capabilities and then shock-proof design cycle time could be significantly reduced. Development of an integrated CAE system for the shock-proof design is presented in this article. At every stages of the development of present work, practical industrial applicability and mass production feasibility are seriously considered and tested so that the system is to be used in the LCD design engineering field.